Natural stone — Lulo Tile, Sydney

Natural StoneStone tiles, pavers, cobblestone & cladding

Marble, travertine, limestone, granite, quartzite and slate, cut as tiles, pavers, cobbles and flutes. For floors and walls, pools and driveways, chosen for projects that should look better in twenty years than they do today.

  • 6Stone families, marble to slate
  • 15 / 30 mmInternal tile and structural paver
  • Inside & outOne stone from living room to pool edge
  • CopingBullnose, pencil and drop-edge profiles
  • SydneyShowroom in Northbridge
01 — The material

Quarried, not made.

Every piece of natural stone took millions of years to form, and no two are alike. That variation is the point: veining that runs the length of a floor, a tumbled edge that softens a courtyard, a granite cobble that hides a decade of tyre marks.

Stone also ages the right way. It wears in rather than out, and it can be honed, sealed and brought back long after a manufactured surface would be ripped up. We carry it for every part of a project, from 75 mm marble subways for a splashback to 30 mm pavers, pool coping and driveway cobbles.

The magic of the Pietra Toscana collection lies in its scale and modularity. I highly recommend running the Elysium blend continuously from an interior kitchen floor straight out to a sunlit alfresco courtyard to create a seamless, heritage-inspired flow.
Michael — on Pietra Toscana
Oak quartzite cobblestone paving in front of a sandstone garden wall
Oak quartzite cobblestone, laid
03 — Stone families

Six stones, six characters.

Each family behaves differently underfoot, in water and over time. This is how we’d brief a client before they choose a colour.

Travertine texture

Travertine

Sedimentary

Formed around mineral springs, with natural voids that are filled or left open. Warm, soft-toned and forgiving underfoot.

Limestone texture

Limestone

Sedimentary

Fine, even and calm. The stone for a floor that should feel quiet, inside and out to the pool coping.

Granite texture

Granite

Igneous

Dense, hard-wearing and indifferent to traffic. The stone we reach for first on a driveway.

Slate texture

Slate

Metamorphic

Split along its natural layers for a riven, grippy face and colour that shifts from charcoal to rust.

04 — Finish

Same stone, four surfaces.

The finish decides where a stone can go as much as the stone itself. Most of our ranges come in more than one.

Honed natural stone finish
HonedGround flat to a smooth matt face. Calm, contemporary, best indoors.Living areas · bathrooms · walls
Tumbled natural stone finish
TumbledRolled with grit until edges soften and the face turns chalky. Looks a century old on day one.Heritage · kitchens · courtyards
Sandblasted natural stone finish
SandblastedBlasted to an even texture that grips wet feet without feeling rough.Pool surrounds · alfresco · steps
Split face natural stone finish
Split faceCleaved along the stone’s natural grain. Rugged, high-friction, unmistakably real.Cobbles · driveways · slate floors
Edge profile of a 30 mm Summit Grey sandblasted marble paver
Summit Grey · 30 mm sandblasted marble paver
05 — Inside to outside

From the living room to the pool’s edge.

Run the same stone straight through the doors. Lay a 15 mm tile inside, switch to a 30 mm paver outdoors and finish the pool and steps with a matching coping, so the eye never meets a join.

  • Bullnose coping610 × 406 × 30 mm
  • Pencil edge coping1220 × 406 × 30 mm
  • Drop edge coping30/60 and 30/70 mm
  • Large format900 × 600 mm
06 — Specify

From sample to set.

01

See it

Visit the Northbridge showroom or ask for samples. Look at stone in daylight and in the light of the room it’s going into.

02

Measure

Send us the area. We add at least 15% for cuts and breakage, and up to 20% for large formats or patterned layouts.

03

Blend

Open several boxes and dry-lay before fixing, so the natural variation spreads evenly across the floor.

04

Seal & set

Seal before and after grouting. We supply the adhesive, grout and sealer to suit each stone, with a guide for your tiler.

07 — Questions

Before you order.

Can natural stone be used outdoors and around pools?

Yes. Choose a textured finish such as sandblasted, tumbled or split face for grip, a 30 mm paver where the stone is laid on a bed outdoors, and a matching coping profile for the pool edge. Our Summit Grey and Crema Salvador come in all three.

Does natural stone need sealing?

Most natural stone should be sealed with a penetrating sealer before grouting and again after, then resealed from time to time depending on traffic. Keep acidic cleaners off marble, limestone and travertine. We supply the right sealer for each stone.

How much extra stone should I order?

Allow at least 15% on top of the measured area for cuts and breakage, and up to 20% for large formats, diagonal or patterned layouts and cut-heavy rooms.

Will my stone match the sample?

It will be the same stone, but no two pieces are identical; that variation is why people choose it. We recommend seeing several pieces in the showroom and blending from different boxes as you lay.

Can I use the same stone inside and out?

Yes, and it’s one of the best things you can do with stone. Summit Grey and Crema Salvador come as 15 mm internal tiles and 30 mm external pavers, so the floor can run straight through the doors to the pool.

Do you deliver outside Sydney?

Yes. We regularly send stone interstate and overseas. Tell us where the project is and we’ll include freight in your quote.

Visit the showroom

Stand on it first.

Stone is a material you judge with your feet and your hands. Book a showroom visit and we’ll lay out the pieces, wet a sample, and talk you through the finish.

Showroom · Northbridge, Sydney  ·  All natural stone